bak-rak tow-ball mounted carrier for anything - from bikes to bins

Uni-rak shown vertical

Bak-rak's patented mounting system gives lots of flexibility to mount things apart from luggage. The Uni-rak is a multi-function fitting with a universal channel on top of the normal bak-rak casting. It is a heavy-duty engineering fitting made of 5 mm laser-cut plate - so it will stand up to a life-time of hard work.

The channel has a range of slots and holes to allow the fitting of many different items. It can be turned upside down, mounted on end, mounted at different heights so you can fit anything to your tow-ball. Among the most useful is a vice. The mount places the vice neatly behind the car or van giving an incredibly useful strong-point to cut or hammer 

This will be a boon to plumbers, electricians, fitters - not to mention gardeners and arboriculturists [to hold a chainsaw for sharpening] and almost all other maintenance people.

The mount can also be used with a footplate on top as a removable step for vehicle access.

Another option is to  use it as a secure carrying point for a generator or compressor which would otherwise be unusable in the vehicle or likely to get stolen.   (Specify our security bolt on the home page.)

Mounted vertically it can support an aerial, high camera or extended loads like ladders or a boat

However the load should be over the towball as cantilevered running loads can fatigue through the unirak.

The Uni-rak can also be used to neatly fit a lightweight winch - that is how our winch-rak works - though better to buy our winch-rak with the right winch and the ability to drive it with a rechargeable drill.   Tow-bracket manufacturers warranty will not cover using a winch - for good reason as it is possible to produce forces high enough to decapitate the tow-ball - heaven knows what that does to a tow-bracket! But like most things - used sensibly it will be no problem!

Dimensions are 250mm long X 70 wide X 40mm deep. It has loads of holes but more can be drilled for anything specific. It now comes in a black epoxy finish that is more amenable to welding than zinc plate.

No weight limit specified as it is totally down to how it is used - but good for 100 kg in the right plane.

Complete kit includes mount bracket, outer casting and clamshell

Uni-rak  £64 inc VAT  for the complete kit

     Buy Uni-rak on home page