G3,G4 base-rak Head Board

A gate shaped frame clamped vertically to the base-rak to support unstable loads. Available as a 650mm steel zinc-plated version. Incorporates clamp points for ropes or straps at top and bottom.

Consists of three tubes that clamp together with cross clamps to fit it to the rack.

The headboard can fit on any side of the rack or several can fit together as in the picture.

It can be stored  unassembled.

  • Do not exceed noseweight rating of your vehicle or towbar

  • Do not exceed the maximum load specified by Bak-Rak Ltd

  • Ensure all loads are safely secured at all times

  • If your number plate or lights are obstructed by the rak or load, a lightbar must be used.